Click to enlarge |
We offer the KONI series of externally adjustable front and rear shock absorbers for MX-5 enthusiasts desiring both improved road holding performance. These gas-filled twin-tube, low-pressure shocks include a large removable knob that allows for quick, simple "dialed in" adjustments. If you’re looking for serious performance from your shocks while still maintaining a reasonable street-ride quality, place KONI at the top of your list!
What is the best adjustment setting for your new shocks? There is no single best adjustment setting for your KONl's because every driver has different preferences for comfort, performance, performance modifications and roads to drive on. For most vehicles, KONI suggests that new shocks be installed in the full soft position (the standard setting right out of the box) to take advantage of the balance of ride comfort and handling designed by the KONI ride development engineers. If the car has performance upgrades (springs, wheel/tire packages, etc.) or the driver wants the car a bit more aggressive, most people find the optimum setting in the 1/2 to one full turn from the full soft range.
Important note: Although these KONI's are the same length as the factory units, installation of these twin tube shocks in place of the factory mono-tube high-pressure shocks may result in an approx 1/4"-1/2" lowering effect due to the lower gas pressures of these replacement shocks. Be sure and factor this additional lowering measurement when selecting a set of aftermarket springs!
Backed by KONI’s limited-lifetime warranty to the original purchaser against defects in workmanship for as long as you own the car and it’s registered for street use. Visit www.koni-na.com for complete information.
Compatible with all MX-5 models, including Bilstein equipped cars. Price listed is for one pair of shocks. Please select either front or rear shocj required.
| PLS SELECT FRONT OR REAR SHOCKS | |
|
