• *17x8
• *4x100
• *ET45
• *16.8lbs ( 7.6kgs) 

Takes a 73mm hubcentric ring also available on this site. The flow formed process results in a product that is stronger/lighter than lesser casting methods. Most everything else in this price range is gravity cast, pressure cast, or low pressure cast with heat treatment.

Brake Fitment:
Fits over all of our Wilwood big brake kits.
Requires a 3mm spacer to fit over our Wilwood 4 and 6 piston caliper upgrades on factory rotor size.
Does not fit the Club model Brembos.

Flow Formed Production Technique results in stronger and more dense final product with less weight than lesser casting methods.

Great for 205mm, 215mm and 225mm tyres. Even 235/40 size tire fits nicely without rolling fenders but may rub plastic fender liner at full lock depending on how much car is lowered, amount of negative camber, and tire choice.

Note we recommend our numerous lug choices with any of our new wheels, stock lugs are too short and fat. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface and are longer for more engagement with stud surface, so they also stay tighter.

MX5 ND Important  TPMS Note:

In the USA, the 2016-2017 ND MX-5 uses NO in-wheel sensors for tire pressure. 2018+ ND Miatas do use physical tire pressure sensors. The new in-wheel sensors do not fit Advanti Storm wheels. Customers will want to pick an aftermarket sensor for that wheel for 2018 and newer, or just use regular valve stems with no sensors if you don't mind the light on the dash.