Available for the MX5NA/NB MX5ND Fiat124 Mini Cooper (2002-"006)
Advanti Racing's new Flow Formed line of wheels are STRONGER and LIGHTER than most choices! Flow forming to yield a strong 500kg load rating and a 15x7 that weighs under 5kg! No competitor comes even close to these specs at this price!
The flow formed process results in a product that is stronger/lighter than lesser casting methods. Most everything else in this price range is gravity cast, pressure cast, or low pressure cast with heat treatment.
The black and grey colours often weigh in just over 10 pounds, this Hyper Silver color is a more expensive finish consisting of powder coating and clear coat over, typically weighs a few ounces more than the other colours, though still under 11 pounds...which is crazy ultra light and you get an even more durable and gorgeous finish.
* 15x7 4x100 +35 offset
* 15x8 4x100 +25 offset
* 17x7 4X100 +40 offset
Clears All Factory MX5 Brakes
Clears Our 280mm Big Brake Kits! and our 289mm kits using a 10mm spacer
**Does NOT clear our V5 BBK (Needs 10mm spacer)**
* Flow Formed construction
* 73mm centre bore
* Clear coated finish
* Cap included
* Valves not included
* Fits 195/50/15, 205/50 tires.
* JWL and TUV approved
* VIA 500kg certification
Takes optional 73/54mm hubcentric rings also available HERE
Always check clearance during install and after car is lowered to the ground, failure to do so can result in damage, death, tires cut on fender lips, and other bad stuff!
12mm bolt holes are perfect for MX5, but some MINI customers would need to change to 12mm studs.
Tire Size breakdown:
195/50/15 fits all years of MX5a with no mods needed.
-205/50 fits NB fenders with no mods needed, fits NA with 1.2 negative camber or better.
Note:- We recommend our numerous lug choices with any of our new wheels, stock lugs are too short and fat. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface and are longer for more engagement with stud surface, so they also stay tighter.
Flow Formed Production Technique results in stronger and more dense final product with less weight than lesser casting methods.
