The 441 Coilover is Feal's standard one-way adjustable monotube damper assembled and valved by Feal here in the USA. We worked with Feal to bring all of the features and details that you want to provide the BEST street performance coilover for the money. Intended for both street use and the occasional autocross or track day. Careful work and countless hours of tuning have gone into providing excellent performance and ride quality.

Ships with 8kg front and 5kg rear spring rates .

Comes standard with extended height top hats in the rear for increased shock travel - crucial for the NA and NB and often an extra cost item in other coilover kits.

Features:
- One way adjustable, 30 click spectrum
- Monotube
- Track-specific digressive valving
- Extended travel rear top hat
- Assembled in house, U.S.A.
- Rebuildable and revalvable in house, U.S.A.
- Independant height adjustment
- Corrosion resistant coating + Anodized aluminum parts
- High quality low friction seals and rod guide bushings
- High flow pistons (allows super high range of damping tuning)

Feal suspension is located in Southern California for services such as rebuilding and re-valving and are easy to handle with fast turn-around times.

NOTE: 2001-2005 MX5's have reduced control arm clearance in the front. There is a small chance of contact between aftermarket coilovers and the control arm on these years. Check out our forum for details and solutions.

Ride Height Adjustment NOTES:
If you have used the maximum amount of height adjustment at the lower base but still want to go higher, then you can further raise the ride height by raising the lower spring perch. Especially in the rear, if you want to run a bit higher then you absolutely need to adjust height further via that lower spring perch, you cannot get it by only adjusting the lower mounting cup. We know that Feal includes some instructions with their coilovers that suggest starting settings, but that is generic information that ships with ALL of their coilovers for all vehicle makes/models, and you need to deviate from that for the MX5 specifically.

Shipping note: These are built to order, please allow 2-3 weeks for these to be constructed.