This wheel is suitable for the following Mazda models:-
17x10 Race Wheel Project!
Ideal offset for plug and play with just a fender roll of max fitment. Chosen offset assumes well over 2 degrees negative camber front and rear, and the more camber you use the less fender roll you need. GWR Budget NC Racer shown here has -3 front camber, -2.5 rear.
Assuming over -3 camber front need mild fender roll for 245/40 and medium fender roll for typical 255/40 RE71R on NC Miata, ton of roll and pull for 275/35/17 on NC (275/40 with light lip roll for RX8). Yes, this setup needs coilovers with serious spring rates to fit and be effective, lowered car to typically 13.25 height front, 13.4-13.5 rear measured from centre of wheel straight up to fender lip, and ideally our front offset bushings.
The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brakes! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger.
Photo is CAD rendering of the wheel.
- 5x114.3 lug pattern
- +43mm offset
- 73.1mm centre bore
- Weight 17.9 lbs .(8kgs)
- Load Rating BIG 690kg (1521 lbs) for Racing!
Always test wheel for adequate clearance to fenders, chassis and suspension components before using these wheels. Failure to do so could result in vehicle damage, loss of control, injury or death.
Clears Wilwood 12.88" Big Brakes front and rear.
Clears our 12.2" front BBK. Needs a 5mm spacer to clear Stoptech C-43 front BBK.