Mazda RX7 FB Engine Kits , Rotary Porting, Parts & Cooling System

Engine Rebuild Kit to recondition your RX7 12A FB (1978-1985) Engine using Genuine Mazda Parts

As a registered Mazda Parts dealer distributor, for any part you may need for your Mazda model, kindly send an e-mail to sales@racingbeateurope.com along with your vehicle model and chassis number so we can assist you.

These Koyo radiators are probably the best flowing and most durable aftermarket radiator money can buy, as used in our own Race Car for the last ten years.

This is a special Order Radiator that is not available in the UK or Europe.

The Racing Beat performance silicone radiator hose kit for the 1979-82 RX-7 is designed to withstand the harsh operating conditions of the rotary engine. The stock rubber hoses can eventually weaken over time, leading to premature failure. Every Racing Beat silicone radiator hose is a 4 ply, 5 layer silicone construction that has been tested up to 300 degrees F.

The Racing Beat performance silicone radiator hose kit for the 1983-85 RX-7 is designed to withstand the harsh operating conditions of the rotary engine. The stock rubber hoses can eventually weaken over time, leading to premature failure. Every Racing Beat silicone radiator hose is a 4 ply, 5 layer silicone construction that has been tested up to 300 degrees F.

Racing Beat RX-7 Double V belt Pulley Set

The Racing Beat-designed Double Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM

Racing Beat offers this 13B Oil Pan to simplify the installation of a 1974-85 13B rotary into a 1979-85 RX-7 chassis delivered with the 12A engine..

As used in our own 3 Rotor 700BHP race car for the last10  years,

This Davies Craig EWP150 High flow electric water pump with aluminium housing will aid cooling and increase horsepower as the power is not drawn from the engine (water pump blanking plates avaliable for the RX-8 & RX-7FD)

The Racing Beat-designed Engine Torque Brace for the 1979-85 RX-7 substantially reduces or eliminates the shuddering experienced by many RX-7 owners when engaging the clutch in either first or reverse rear.

Genuine Mazda Long Life FL22 Premixed coolant that contains all the inhibitors to keep the inside of your water jackets healthy and clean as well as keeping your engine cool in the summer and stop freezing in the winter Price is for one 5Litre can

Racing Beat Intake Port Templates allows you to undertake your own "street" Bridge Port or J Port intake porting on most 12A or 13B rotary engines (except 13B 6-port and Renesis). Rotary tuners long ago discovered that changes to the intake port shape will alter intake timing, allowing increased airflow and velocity improvements. These templates are traced from Racing Beat's own master templates, which are the result of years of research and development.

The Racing Beat "Streetable" or "Race" Exhaust Port Templates for all 12A & 13B rotary engines allow you to undertake your own exhaust porting efforts. Our Racing Beat laser-cut aluminum porting templates are patterned after our own original master templates. Designed and refined over decades by Racing Beat's legendary engine builder and co-founder Jim Mederer, this exhaust port template gives you a powerful resource to assist you in your engine upgrade project.

Intended for virtually all 1974-92 12A and 13B rotary engines, the Racing Beat main drive pulley is designed for high performance/RPM street and moderate racing use, slowing the water pump and alternator 13-15 %, thereby reducing cavitation and power loss. If used with our Aluminum Alternator Double Sheave Pulley, you can have a true dual belt system.

Racing Beat's extremely popular Front Engine Mount allows any 1974-85 13B engine to be installed into any 1979-85 12A RX-7 chassis..

Mazda Competition Engine Mountings - 1979-85 RX-7 All  one pair  - We offer the Mazda Competition Engine Mount for high performance and racing applications. Although this is basically the same mount as the standard unit, the rubber in this mount is approximately 40% stiffer as compared to the stock mount.

Price Shown is for one Pair  

We offer the Mazda Competition Parts Department competition transmission mount for the 1979-85 RX-7 (all models). This mount features rubber material that is approximately 40% stiffer than the stock mount. One required.

Mazda Motorsports Competition Part

Rotary water system insurance! Because many sealers on the market will completely block the small water ways in a Rotary RBE has tested this sealer before announcing this product for use in Rotary engines

This Mishimoto Intercooler R-Line, Black Series is ideal for just about any Mazda Conversion to mount as either Front Mount or V Mount set up.

As used on our own 700 BHP Race Car for the last ten years, so a must for all Race or Track day Mazda's 

Direct replacement 20psi CSF Radiator Cap for NA, NB, NC,ND and RX-8 Models

This 20 psi version is higher pressure than the factory and greatly helps keep the coolant in the system.

As used in our 700BHP Rotary Race Car Valvoline VR1 Racing is a 20w-50 mineral engine oil that’s formulated to deliver maximum engine performance in both turbocharged and non-turbo petrol engines. 

The Flywheel Stopper Bar Tool is normally required whenever the rotary engine flywheel retaining nut is being removed or installed.

Brand New RX7 13B or 12A PP Housings with Peripheral ports.

These are specially Made to order CNC Machined from Brand New 13B Housings  

You are buying one Rotor Housing