Mazda RX7 FC ENGINE REBUILD PARTS & COOLING

The Racing Beat-designed Double Aluminum Alternator Pulley reduces alternator RPM approximately 20% from stock RPM,

The Racing Beat-designed Engine Torque Brace for the 1986-92 RX-7 non-turbo substantially reduces or eliminates the shuddering experienced by many RX-7 owners when engaging the clutch in either first or reverse rear.

Mazda Competition Engine Mount for high performance and racing applications. Although this is basically the same mount as the standard unit, the rubber in this mount is approximately 40% stiffer as compared to the stock mount. Priced as a Pair of Mounts

The Racing Beat-designed and manufactured Oil Baffle Plate slows the return of engine oil as it drains from the engine into the pan. In slowing the oil's return, air that has been suspended in the oil (as foam) is allowed more time to separate from the oil.

First Line Radiator/pressure Cap to fit all years of RX-8 and RX-7 FDPressure 0.9

As used in our own 3 Rotor 700BHP race car for the last10  years,

This Davies Craig EWP150 High flow electric water pump with aluminium housing will aid cooling and increase horsepower as the power is not drawn from the engine (water pump blanking plates avaliable for the RX-8 & RX-7FD)

As used on our own 700 BHP Race Car for the last ten years, so a must for all Race or Track day Mazda's 

Direct replacement 20psi CSF Radiator Cap for NA, NB, NC,ND and RX-8 Models

This 20 psi version is higher pressure than the factory and greatly helps keep the coolant in the system.

Genuine Mazda Long Life FL22 Premixed coolant that contains all the inhibitors to keep the inside of your water jackets healthy and clean as well as keeping your engine cool in the summer and stop freezing in the winter Price is for one 5Litre can

This Mishimoto Intercooler R-Line, Black Series is ideal for just about any Mazda Conversion to mount as either Front Mount or V Mount set up.

Genuine Mazda RX7 FC Turbo Housings that can used on single Turbo RX-7FD3S Engines

Current Mazda Price is £916 plus Vat 

Price shown is per housing.

As used in our 700BHP Rotary Race Car Valvoline VR1 Racing is a 20w-50 mineral engine oil that’s formulated to deliver maximum engine performance in both turbocharged and non-turbo petrol engines. 

Genuine Mazda Water Seal Kit , includes all the seals to bolt the Rotary Engine block together.

Goopy Apex Seals  are a direct replacement for the weak less durable Mazda Apex seal are now available and with hundreds of sets of Goopy Apex seals sold over the last fifteen  years there has never ever been an issue for any of our customers.

With hundreds of seals sold Goopy seals  offer a proven more durable than stock direct replacement Apex seal for the RX-8 at a price less than you would pay for a stock Apex seal from a Mazda dealer.

99% of our rebuild kits we supply go out with Goopy Apex seals that are perfect for standard to highly modified Rotary Engines.

Also like many engine builders and tuners use these in our own Championship winning 700bhp race car .

Please note 3mm are a special order so please contact for availability   

The Flywheel Stopper Bar Tool is normally required whenever the rotary engine flywheel retaining nut is being removed or installed.