Mazda RX7FD Engine Rebuild parts & New Engines

As a registered Mazda Parts dealer distributor, for any part you may need for your Mazda model, kindly send an e-mail to sales@racingbeateurope.com along with your vehicle model and chassis number so we can assist you.

These engines are to fit EVERY Manual FD3S Model from a Type R to a Spirit R (not automatics)

We box these engines securely so they can ship anywhere in the World 

These Engines are a Special Order, please contact sales@racingbeateurope.com for availability.

Engine Rebuild Kit to recondition your REW Engine using Genuine Mazda Parts / Performance Goopy Apex Seals 2mm that we use in our own 700BHP Race Car or Mazda 2mm Apex Seals x 6 can be chosen on the drop down box below Or Mazda Apex Seals.

This kit is for engines that are taken apart and it is found that the only discernible wear has happened to the Rotor Apex seals. Genuine Mazda Parts / Performance Goopy Apex Seals 2mm, 3mm or Mazda 2mm Apex Seals x 6 can be chosen on the drop down box below

Genuine Mazda Apex seal set

Genuine Mazda Water Seal Kit , includes all the seals to bolt the Rotary Engine block together.

Goopy Apex Seals  are a direct replacement for the weak less durable Mazda Apex seal are now available and with hundreds of sets of Goopy Apex seals sold over the last fifteen  years there has never ever been an issue for any of our customers.

With hundreds of seals sold Goopy seals  offer a proven more durable than stock direct replacement Apex seal for the RX-8 at a price less than you would pay for a stock Apex seal from a Mazda dealer.

99% of our rebuild kits we supply go out with Goopy Apex seals that are perfect for standard to highly modified Rotary Engines.

Also like many engine builders and tuners use these in our own Championship winning 700bhp race car .

Please note 3mm are a special order so please contact for availability   

RX7FD3S REW Rotor Housing Genuine Mazda to fit any year or model of RX-7FD to fit front or rear.

Our Price is £875.....Mazda UK Price   £1025 

Genuine Mazda RX7 FC Turbo Housings that can used on single Turbo RX-7FD3S Engines

Current Mazda Price is £916 plus Vat 

Price shown is per housing.

Genuine Mazda RX7 Apex Seal Spring set

Genuine Mazda RX7 Rotor Bearing price quoted is for one Rotor Bearing.

Genuine Mazda RX-7 Stationary Gear Bearings x2

RX7 Side Seal set Genuine Mazda 13B

RX7 Side Seal Spring set of 12

Genuine Mazda 3mm Apex seal spring set of six

These are Series 5 FC Rotors that can be used in FD or earlier 13B Engines

Please note these come as bare Rotors with no bearings or any other parts 

RX7 FD FC Rear Main Oil seal Genuine Mazda

Special offer RX-7FD3S  Eccentric Shaft N3G1-11-D00A 

Genuine Mazda RX7FD Front Housing Gasket to fit any model of year or Model of FD3S

Genuine Upper Intake Manifold Gasket 

Genuine Mazda RX7FD Lower Intake Manifold Gasket 

This is the Later Revised gasket that replaces the thin early paper gasket that fails if more boost is applied 

RX7 Oil Pump Chain Genuine Mazda

KOYO Racing performance radiator with show quality looks and finish Leave your cooling concerns behind

We use this Koyo Radiator to keep our 700 BHP 3 Rotor Circuit Race Car Cool, so we know how well this operate.   

This is a direct replacement for all Mazda RX7 FD3S Models from 1991 - 2002 

As used in our own 3 Rotor 700BHP race car for the last10  years,

This Davies Craig EWP150 High flow electric water pump with aluminium housing will aid cooling and increase horsepower as the power is not drawn from the engine (water pump blanking plates avaliable for the RX-8 & RX-7FD)

As above

New genuine Mazda water pump complete with Mazda gasket

Genuine Mazda RX7FD Water Pump Gasket to fit any model of year or Model of FD3S

Racing Beat Intake Port Templates allow you to undertake your own "street" intake porting effort on most 12A or 13B rotary engines (except 13B 6-port and Renesis).

The Racing Beat Intake Port Templates allow you to undertake your own standard bridge-port efforts on any 12A or 13B rotary engine

(except 13B 6-port and Renesis Engines ) 

The Racing Beat "Streetable" Exhaust Port Template for all 13B peripheral exhaust port rotary engines

Rotor Oil control ring set:-4 inner Oil control Viton seals4 Outer Oil control Viton seals

Special order Mazda Motorsports Competition Part.

The Mazda Factory Race (MFR) rotor bearings for all 12A & 13B engines are the best bearings available of engine operation near or above 8500 RPM. The rotor bearings are manufactured with a deep groove for additional oil storage and offer an additional .0005" (approximate) clearance. These bearings can be used in 1973 and earlier engines by grinding off the indexing tab.

Price is for one bearing.

Special Order Mazda Motorsports Three Window Competition Main Stationary Gear Bearing

Fits all 12A 13B engines from 1974-1991

Price is for one bearing.

Racing Beat Mazda Rotary Race Oil Pressure Regulator 105-115 PSI  to fit all Mazda Rotary engines from 12A to 13B to  20B to RX-8 (not R3)

The Racing Beat High Performance Rear Oil Pressure Regulator interchanges exactly with the stock rear oil pressure regulator on all 1971-2008 12A, 13B, and 20B engines. This oil pressure regulator is designed to bypass at 105-115 PSI. (Pressure this high should be used only for racing). When using this regulator, the front pressure regulator should be shimmed an 1/8-inch to ensure that it does not limit the oil pressure (shims included).

Rotary water system insurance!Because many sealers on the market will completely block the small water ways in a Rotary RBE tested this sealer announcing this product for use in Rotary engines

This Mishimoto Intercooler R-Line, Black Series is ideal for just about any Mazda Conversion to mount as either Front Mount or V Mount set up.

Lucas Octane Booster - A Real Octane Booster! Tested and proven to deliver three times more boost than most other brands. Lucas Octane Booster is a GENUINE Performance Enhancer! Unlike many other addatives Lucas Octane Booster does not contain Qxygen so your ECU mapp will not be changed.