Mazda RX8 Engine Re-build Kits & Parts

As a registered Mazda Parts dealer distributor, for any part you may need for your Mazda model, kindly send an e-mail to sales@racingbeateurope.com along with your vehicle model and chassis number so we can assist you.

We can supply brand new genuine Mazda RX-8 Engines from 2003-2011. 

These are NOT reconditioned engines, and we have five 231 currently available, with others available to be special ordered.

**Please note, these are a Special Order and once ordered they cannot be cancelled from Mazda **

Payment can only be accepted via  Bank Transfer only   

Please contact us on sales@racingbeateurope.com  for current availability and shipping quote as this may vary depending on country of residence  .  

Latest news Mazda have started making 192  5 Speed engines again, please see below.

This kit is for engines that are taken apart and it is found that the only discernible wear has happened to the Rotor Apex seals that normally are found to have worn to around half the depth they should be, accounting for low compression. High Performance Goopy Apex seals are now recommended over the fragile Mazda Apex seals .

As suggested this is a more comprehensive rebuild kit than the previous kit for high mileage engines or engines with issues other than just loss of compression using all Genuine Mazda parts for all (This kit saves over £250 than buying from Mazda) .

The High Performance Goopy Apex seals are highly recommended over the fragile Mazda Apex seals and have proved to be much more durable .

Additional Stationary Gear bearings and Rotor bearings available to add to order. Please make your selection below

Goopy Apex Seals  are a direct replacement for the weak less durable Mazda Apex seal are now available and with hundreds of sets of Goopy Apex seals sold over the last fifteen  years there has never ever been an issue for any of our customers.

With hundreds of seals sold Goopy seals  offer a proven more durable than stock direct replacement Apex seal for the RX-8 at a price less than you would pay for a stock Apex seal from a Mazda dealer.

99% of our rebuild kits we supply go out with Goopy Apex seals that are perfect for standard to highly modified Rotary Engines.

Also like many engine builders and tuners use these in our own Championship winning 700bhp race car .

Rotor Housing to fit all RX8 +R3 RX-8 models .

The Racing Beat S-Port Templates allow you to undertake your own porting efforts on all model years of the Renesis 13B engine. 

Racing Beat developed these to put power into the mid-range where the RX-8 lacks power, this in turn translates into the car going faster up the road.  

When buying the low compression kit you may wish to add these Genuine Mazda Stationary Gear Bearings to the kit.  Part Number    NF01-10-E04     These bearings can be used in any model of RX-8 Engine 

RX8 - Genuine Mazda Rotor Bearings

Genuine Mazda Uprated Engine Mounts to fit: 2003-2011 RX-8.

(Price is per engine mount )  

Rotary  Engine Rebuild Manual This RX-8 Engine Rebuild Manual will also give assistance rebuilding ANY Rotary.

This is a 50 page paper version that's not available in Europe and will prove invaluable for disassembling and reassembling all Rotary  engines

This direct Replacement Mazda RX8 R3 super fast starter motor spins the engine faster to a greatly reduce the risk of flooding your RX-8 both hot and cold.

We have sold hundreds of these with never an issue and they have helped RX8 Owners all over the world

We even have this same Starter Motor fitted to our 700BHP 3 Rotor Race Car and it starts perfectly.

See pictures attached.

All the gaskets needed to fit the ancillary's onto your new 192 or your 4 port Auto engine 

Please note this is a Special order and at times takes two weeks to assemble depending on parts avaliabilaty.

RX8 Engine installation kit. All exterior gaskets Genuine Mazda for RX8 231 6 speed engine  All the gaskets needed to fit the ancillary's onto your new or rebuilt 231 engine

RX8 Engine installation kit. All exterior gaskets Genuine Mazda for RX8 R3  6 speed engine  All the gaskets needed to fit the ancillary's onto your new or rebuilt R3 engine

Racing Beat Uprated Oil Pressure Regulator - 90-95 PSI plus Thermal Bypass Pellet Replacement kit so you know the oil is properly getting to the places it should all around the engine.

Mazda RX-8 Front  engine Cover Gasket 

The Flywheel Stopper Bar Tool is normally required whenever the rotary engine flywheel retaining nut is being removed or installed.

Genuine Mazda Long Life FL22 Premixed coolant that contains all the inhibitors to keep the inside of your water jackets healthy and clean as well as keeping your engine cool in the summer and stop freezing in the winter Price is for one 5Litre can

As used in our 700BHP Rotary Race Car Valvoline VR1 Racing is a 20w-50 mineral engine oil that’s formulated to deliver maximum engine performance in both turbocharged and non-turbo petrol engines.