Please note, if any Racing Beat or Good-Win Racing products are not in stock in the UK, we will aim to fulfil orders within 2/3 weeks.

Mazda RX8 Exhaust System

Cannot find what you are looking for? Then please contact us 01474 777 800 or email us: sales@racingbeateurope.com

Sort by:

View

Showing 1 - 24 of 24 products
Showing 1 - 24 of 24 products

Out of stock

Mazda RX8 Racing Beat Exhaust Manifold.

0 review(s)

The Famous RX-8 Manifold by popular demand is  back in production by Racing Beat. 

To fit All RX-8 Models from 2003-2001 The Racing Beat RX-8 Manifold for the Renesis engine is constructed using 100% stainless steel for superior quality, performance and appearance.

Our exclusive cast stainless-steel mounting flange   has been designed to allow the smooth transition of the exhaust gas flow from the engine to the primary tubing.

Plus unlike steel flanged RX-8 Manifolds that warp leading to exhaust leaks is not an Issue due to the stainless-steel mounting flange.

The "Racing Beat REV8 street legal, 3" bore cat-back exhaust system is the perfect replacement for your stock RX-8 exhaust indeed many many customers believe this is the exhaust best suited to the needs of the RX-8 owner. Not too loud, but loud enough to enjoy the Rotary experience properly with a real horse power gain, Best of all these are Track Day Friendly by always being under the noise limits!   

ETA For the new batch being released is 25 7 2025  So we are taking Pre-Orders

As a registered Mazda Parts dealer distributor, for any part you may need for your Mazda model, kindly send an e-mail to sales@racingbeateurope.com along with your vehicle model and chassis number so we can assist you.

Its well known that a non-resonated catalytic converter pipe on the RX-8 can produce an overwhelmingly loud exhaust, but if you require a modest, quieter exhaust tone, then the Racing Beat resonated pipe is your answer. Designed to provide the ultimate combination of performance AND sound.

This direct replacement High Flow 200 cell performance cat to fit all RX-8 Models, will interchange with the standard manifold any make of exhaust manifold or cat-back system. Using the combination of the Racing Beat de-cat pipe made from 304-stainless steel and Magnaflow which uses a stainless steel spun body utilising revolutionary new metallic catalyst technology. 

**Please Note**. The rear donut gasket is not included as in most cases this can be reused.  If you do require one please click HERE.

Please note these are a special order so allow an ETA of 2-3 weeks 

The "Racing Beat REV8 street legal, 3" bore cat-back exhaust system is the perfect replacement for your stock RX-8 exhaust indeed many many customers believe this is the exhaust best suited to the needs of the RX-8 owner.

Not too loud, but loud enough to enjoy the Rotary experience properly with a real horse power gain.

 Best of all these are Track Day Friendly by always being under the noise limits! 

We all know the RX-8 or MX-5 NC Transmission Tunnel gets when either on track or a long journey and here is the solution, withstanding direct heat up to 1750 F (954 C)

 This Transmission Tunnel Heat Shield Kit made by heat barrier experts DEI, replaces your missing or damaged factory tunnel shielding and solves the problem of hot interiors of your RX8 or MX5.

This mandrel-bent 3 OD racing pipe is a direct bolt-on replacement for the stock catalytic converter section and when used with a more freely flowing exhaust system will give a good power increase along with higher noise levels so you can hear the gorgeous sound of Rotary power even more .

**Please Note** The rear donut gasket is not included as in most cases this can be reused.  If you do require one please click HERE.

The Racing Beat RX-8 Race Exhaust System V2 extended tip is a lightweight exhaust system that is intended for race applications but can happily be used on the road as well.

The Racing Beat RX-8 Race Exhaust System is a lightweight exhaust system that is intended for street or race applications

For those who really want to hear the sound of their Rotary. these Mazda RX8 performance exhausts are made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections.  Hand Made in the UK 

Please note these are made in the UK to order so allow three weeks for dispatch 

Please contact sales@racingbeateurope.com for  availability

Item in Stock

Mazda RX8 Race Manifold (made in Italy)

0 review(s)

Racing exhaust manifold for Mazda RX-8, entirely made of 304 stainless steel and 316 stainless steel.

 Unlike the Mazda manifold the 47mm primary pipes are the same length . 

100% Made by PURE in Italy. Will fit any year or model of RX-8 

Please note that the cheap pattern on sale will not work correctly on the RX-8

Genuine Mazda RX8 Exhaust Manifold Gasket to fit all models 03-2011 A Mazda dealer will charge £113.92 inc Vat for the same RX8 Exhaust Manifold Gasket, we charge £90 inc Vat Saving you £23.92

Mazda RX8 Manifold to Catalytic Convertor Gasket 

Genuine Mazda 

The Air Injection Cover Plate for the RX-8 is intended to block the opening in the Mazda OEM Factory exhaust manifold, or Racing Beat header.

The HKS Hi-Power Exhaust - RX-8 - 2004-2011 - 31006-BZ001 is a Japanese classic. Straight from the JDM market, comes one of the most known and respected exhaust systems.

The HKS Hi Power exhaust has been used on both classic Japanese street cars as well as full blown race cars due to it's ability to flow incredible amounts of exhaust through it's straight through muffler design,

Here's a Racing Beat exclusive, a Mazda Furai-inspired rotor-shaped universal muffler for use with your custom exhaust system. 

Item in Stock

Universal Presilencer 3-inch ID

0 review(s)

Racing Beat offers two versions of our 3-inch ID Power Pulse Presilencers for use in the design and manufacture of a custom exhaust system for your street or race vehicle. Well-suited for the demands of high-power turbo applications,

Racing Beat 3" Universal Tail Pipe Exhaust Tip .With Laser-etched Racing Beat logo on both left and right sides.

Mazda RX8 Manifold Sensor Air Fuel Ratio Genuine Mazda Please Note you must choose your model of car 5 Speed or 6 Speed

We offer this Racing Beat cast-stainless steel 3" (76mm) ID flange for use in many custom applications. This flange measures 11.5 mm (7/16")  thick, has 7/16" diameter mounting holes spaced 110mm (approx. 4-5/16") apart (from centre-to-centre). Uses 3" ID gasket.

Price listed is for one (1) flange -  photo shows the inlet and sealing sides of a single flange.

RX-8 for use between silencer and connecting pipe on the Racing Beat exhaust system for the 2004-2011 RX-8. Plus RX-7 Exhaust Systems. Please see below for details.