Mazda RX8 Suspension and Axle Parts

As a registered Mazda Parts dealer distributor, for any part you may need for your Mazda model, kindly send an e-mail to sales@racingbeateurope.com along with your vehicle model and chassis number so we can assist you.

Racing Beat-designed Anti roll bars for Road or Track, reduce chassis roll during cornering and increases your cars sensitivity to steering inputs, thereby improving maximum cornering power. As used on our own Triple Championship Winning RX-8

The Flex Z damper is the latest evolution of Teins excellent Flex fully adjustable coil-over kit, which is very compliant on our rough roads and can be then adjust to be great on the Race Track. Developed to provide the ultimate balance of comfort and performance for both street driving and circuit use. Tein Suspension Dampers have always been the choice, for both our own road cars and race cars.

This system is a development of the popular TEIN Active System featuring a new "Jerk System" which means the second you make any steering wheel adjustment the dampers compensate giving your car its optimum cornering ability.

As used on our own 700 BHP Race Car but this kit is just as happy on the road.

This is an excellent step towards suspension tuning.

This RX-8 spring set will provide a front and rear drop of approximately 12-13mm  drop both front and rear. A modest spring rate increase of approximately 20% will provide a performance improvement without sacrificing ride quality.

With Mazda wanting £60 per end-link we Quality standard replacements for the  Mazda RX8 Anti Roll Bar End Links at less than half the price.

Price is per end link 

MeisterR ZetaSport Coilovers for the Mazda RX8 (SE3P) 03-UP are engineered to offer top-tier performance along with exceptional ride comfort.

The key to this performance is the MeisterR SRV (Speed Reactive Valve), developed and manufactured in-house at our UK workshop.

Drawing on over a decade of experience, the SRV represents an innovative valving design that combines the responsiveness of a double digressive valve with the comfort of a linear valve.
This results in unparalleled ride comfort, precise steering response, and enhanced chassis stability.

The ZetaSport are designed to be the best all-around suspension within its price bracket, providing uncompromising performance for the road and and occasional track. 

**Please note will not fit the RX8 R3 models**

By fitting RX-8  TEIN Endura Pro Plus Direct Replacement Shock Absorbers to replace your worn or leaking standard shock absorbers not only will the ride quality improve, but also enhance the already excellent handling of your RX8, plus you can keep the Standard Mazda Springs or any aftermarket ones you have had fitted. 

On top of all this they are 16 point adjustable for a nice soft ride or stiffened up for some more "Spirited" driving! 

Tein - Street Performance coilovers with German TUV Part Approval. This kit was developed to provide a sporty ride feeling and aggressive stance by being able to set your RX-8 at the height you wish.

Progress Technology RX8 anti-roll bars dramatically improve handling.

How? They minimize the traction-robbing body roll ; that rolls part of the outside tires off the pavement.

Progress Technology Sport-tuned Anti-roll bars replace skinny OEM bars and rubber bushings with larger diameter (stiffer) alloy steel bars and polyurethane bushings.

More roll stiffness means less body and the result is more grip and added driver control!

The Racing Beat sway bar end link set can is fully adjustable and can be used on both standard height and lowered vehicles. As used on our own Championship winning Race Car for the last nine years

Featuring the world's first (*1) triple- tube-structured "Upright Strong Tube" this new Mono sport kit offers the finest and most comfortable ride feel that makes even a long-distance driving seem like a breeze, also allowing your RX8 to be transformed into an awesome circuit machine with a simple adjustment of the dampers

Energy Suspension HyperFlex Polyurethane bushings have been a staple in the suspension community for over 30 years. 

These bushes are designed for Fast Road and Track use. They will dramatically improve handling, steering response, road holding and stability,

As used on our own 700BHP RX-8 Race Car to win three Championships  

TEIN S.Tech Springs are an excellent step towards suspension tuning. offering a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks.

Eibach's proprietary, progressive spring design, the RX8 Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

2003-2008 Standard Replacement to fit all models but not PZ or R3 models. 

Please note fitting a pair is advisable so the great handling of the RX8 is not altered.

Price show is for one shock absorber

2003- 2008 Quality Standard Replacement Rear Shock Absorber made by KYB to fit all models (price is per side) Please note fitting a pair is advisable so the great handling of the RX-8 is not altered. Please note will not fit PZ models

As fitted to our RX-8 Race Car

Mazda RX8 Cusco Strut brace with master cylinder Brake Stopper , will not only make the excellent RX8 Chassis even better but will also improve brake pedal feel as the bulkhead cannot flex.

CUSCO STRUT BAR TYPE OS WITH BCS

         RX-8 SE3P 460 540 AMN

Mazda RX8 Cusco Strut Rear brace will make the excellent RX8 Chassis even better

To Fit All Mazda RX8 Models Suspension Arm Front Upper (Genuine Mazda) Please Choose Right Hand or Left Hand below

To Fit All Mazda RX8 Models Suspension Arm Front Lower (Genuine Mazda) Please Choose Right Hand or Left Hand below

These arms will fit any and ALL 231,192, Auto and R3 Models. 

Improves efficiency of work due to increased lapping area

If you need Xtra Camber then these Hard Race Top Wishbones are just what you need

HardRace Suspension Arms will stop your suspension flexing, making your wheels go out of line under cornering and braking. The result will be faster lap times because you will also have much more driver feedback.

HardRace Suspension Arms will stop your suspension flexing, making your wheels go out of line under cornering and braking. The result will be faster lap times because you will also have much more driver feedback.

HardRace Suspension Arms will stop your suspension flexing, making your wheels go out of line under cornering and braking. The result will be faster lap times because you will also have much more driver feedback.

HardRace Suspension Arms will stop your suspension flexing, making your wheels go out of line under cornering and braking. The result will be faster lap times because you will also have much more driver feedback.

HardRace Suspension Arms will stop your suspension flexing, making your wheels go out of line under cornering and braking. The result will be faster lap times because you will also have much more driver feedback.

Stronger end links are a MUST when you change to a stiffer sway bar and when you lower your MX5/RX8 you want adjustable end links for correct geometry (bar ends level).

Good-Win Racing Anti Roll Bar End Links include TWO centre studs so that this one end link has the widest range of adjustment of any end link on the market. Sold as One Pair

HardRace Suspension Arms will stop your suspension flexing, making your wheels go out of line under cornering and braking. The result will be faster lap times because you will also have much more driver feedback.

These performance sway bar endlinks utilize heavy duty steel ball joint ends that adjust and rotate to any angular combination to allow adjustment needed to eliminate sway bar preload.

Price shown is for a pair of endlinks 

With the right Eibach Pro-Spacers installed, your car takes on a more aggressive look

Price is Per Pair

• Total Track Widening = 40mm (20mm per Side)
• Bolt Pattern x 5 = 114.3mm 
• Centre Bore = 67mm

Mazda RX-8 - Powerflex Road Series - Polyurethane Bushes Front Kit

POWERFLEX Road Series bushes enhance your car's road grip and chassis performance by minimising the amount of excess flex in the suspension. If your car suffers from irregular tyre wear, braking instability and fuzzy handling then Powerflex has the answer. Polyurethane bushes offer a cost-effective solution to your car's suspension needs.

Mazda RX-8 - Powerflex Road Series - Polyurethane Bushes Rear Kit

POWERFLEX Road Series bushes enhance your car's road grip and chassis performance by minimising the amount of excess flex in the suspension. If your car suffers from irregular tyre wear, braking instability and fuzzy handling then Powerflex has the answer.

Polyurethane bushes offer a cost-effective solution to your car's suspension needs.

For those racing with WIDE sticky tyres upgrade your front MX5 hubs to these factory 2009+ RX8 hubs for safety and durability.

These are much more beefy than your factory MX5 hubs because they were designed for the heavier four door RX8, but they are plug and play...they bolt right up to the MX5 because your MX5 is a shortened RX8 platform.

PRICE PER HUB - So if you need TWO please order Two 

We can also supply Series One  2003-2008 RX-8 Front hubs via the drop down box below.  

Rear Axle Hub Mazda RX-8 Genuine Mazda to fit all RX-8 Models 

Price is for one Hub 

Genuine Mazda Rear RX8 Rear Wheel Bearing   

Price is Per Bearing 

These urethane bushings are offered as direct replacements for the bushings that were originally supplied with your Racing Beat Anti Roll bars.

Please select Front or Rear bushings required  

Price is Per Pair 

Kit includes bushings for all suspension bushings in the car and the differential. This "offset" version of SuperPro's suspension bushing kit includes upgraded bushings for all suspension positions just like the standard version of this kit, but substitutes offset bushings in key positions to achieve additional alignment range over the standard bushing geometry for high performance uses. 

This is the "standard" kit: all bushings retain factory geometry, and the softer differential bushing is selected for lowest NVH.

We also have an offset version of this kit listed separately which includes offset bushings for additional caster and camber adjustment as well as a slightly stiffer differential bushing for track-focused setups.

These bolts/washers space the lower shock mount position on the NC and RX-8 towards the centre of the car to make the shock motion more linear as the suspension travels through its range of motion.

Did you know that Mazda designed the NC and RX-8 to corner on the bump stops like the earlier cars? Now you can eliminate the factory understeer!

Bump stop kits are based on your chosen spring rates, or check the application guide for our recommendations. We use high-quality materials in our stops to add suspension travel and comfort while maximizing grip and performance.

This is the COMFORT kit, for MiX5's using Koni Sport, KYB, Bilstein, and Tokico Shocks. Providing better performance than stock bump stops under all conditions but emphasizing comfort. Includes four (4) bump stops only. 

Application Notes: For cars at stock ride height/stock springs or slightly lowered. A good choice for street/mild sport applications.

Proven on the Track, the TEIN MONO RACING is not just an engineering marvel; it's a track-proven performer. It has demonstrated its prowess on circuits around the world, making it a trusted choice for serious racers seeking an edge.

Race-Ready Durability:

Crafted with high-strength materials and subjected to rigorous testing, the TEIN MONO RACING is built to withstand the rigors of intense racing. This durability ensures reliable performance, no matter how demanding the track environment.

*Please note image shown, is for illustration purposes only*