Mazda RX8 Wheels, Wheel Bearings & Accessories

As a registered Mazda Parts dealer distributor, for any part you may need for your Mazda model, kindly send an e-mail to sales@racingbeateurope.com along with your vehicle model and chassis number so we can assist you.

TÜV  Approved CALIBRE Wheels 

Classic Rotary Style mesh silver wheel with a polished lip

9x18"  5x114.3 ET35.00 72.60 Centre Bore

This is a Classic Mazda style wheel of the type that Mazda fitted to the RX-7FC Turbo II but in a much bigger Modern wheel size 

RX8, RX7FD & RX7FC Turbo II & MX5 NC

Price quoted is for a set of 4 wheels 

Fits both MX5NC, RX8, RX7FD & RX7FC

The Konig Hypergram is a lightweight 7Kilo Wheel , that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! (Price quoted is for a set of four wheels)

The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brakes! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger. MAX CORNER SPEED WITH 245/40 AND 255/40 TYRES!

(Price is for a set of four wheels) RX8 Picture Courtesy of GWR Customer Thomas West

Konig Ampliform 18x8.5 5x114.3 Et45 Dark Metallic Graphite

With any wheel Konig develops with Flow Forming Technology, the result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design

Available in Black with a Silver Polished Face or Black these value for money wheels are a direct replacement for your tired dull Mazda rims and you can even use your existing Tyres

Direct Replacement Suzuka Wheels for your RX8 keeping you existing size tyres 18x8 

These are the exact wheels used on our Championship Winning RX-8 . The RAIJIN is a light weight street wheel designed for the everyday driver but with added MAT technology performance benefits.

Special order from Enkei Japan in the 45mm offset FITS all four corners of your RX7 FD or RX8 9.5 X18  (We use this size on our own Race car). Silver colour only. 275/35/18 or 285s for all four corners but (if you are lowered a lot you will need to roll the wing lips to clear this wide...those who don't want to roll should consider 265/35/18 instead.

With the right Eibach Pro-Spacers installed, your car takes on a more aggressive look

Price is Per Pair

• Total Track Widening = 40mm (20mm per Side)
• Bolt Pattern x 5 = 114.3mm 
• Centre Bore = 67mm

Competition Alloy Wheel nuts in choice of 3 colours as used on our own race car. 12mm x 1.5 to Fit all Mazda's and takes a 19mm socket rather than the big 21mm socket to make the wheel nuts easier to fit into the wheel holes. Not to be confused with cheap Chinese chewing gum wheel nuts,

Price shown is for a set of 4 nuts.

Mazda or Ford Longer Wheel Studs to enable Spacers to be fitted

Price for 63mm or 47mm is per wheel stud M12 x 1.5mm.thread size

Universal wheel spacers are a very economical way of to increase the track width of your car. These spacers are manufactured from pressure die cast aluminium to close tolerances,

Price is Per Pair

6mm thick uni 5 hole PCD 95mm to 120 mm       

10mm thick uni 5 hole PCD 95mm to 130 mm    

20mm thick uni 5 hole PCD 95mm to 130mm

As above

These special small diameter steel spline dive wheel nuts are designed for wheels with small bore wheel nut holes. Kit includes McGard Spline Drive 16 or 20 Wheel Nuts & Tool Set

Tough enough for an impact gun, yet super light. Less than half the weight of steel lugs. These are a closed end lug nut design for a clean look on your street car. Sold in sets of 16 or 20 lugs

Genuine Mazda Rear RX8 Rear Wheel Bearing   

Price is Per Bearing 

This is the tool for McGard Spline Drive lugs.

Fits the following models:-

MX5NA/NB MX5NC MX5ND FIAT 124 RX8 RX7 MAZDA 2 MAZDA 3 MAZDA 6 

Set of FOUR. High quality, lightweight CNC aluminium alloy valves that will not wear out like the cheap freebies you get from the tire shop, and do not rust.

They easily handle tremendous acceleration shock loads (shear) and lateral forces (elongation). Sold as a set of 16 or set of 20

Moroso Wheel Studs, available as a  pack of 16 or 20 

Extreme strength and extended length wheel studs made in the USA by Moroso.

Manufactured from high grade SAE 8740 steel to withstand shear loads of 190,000 psi, with a black oxide finish.

A necessity for any car in competitive racing. They easily handle tremendous acceleration shock loads (shear) and lateral forces (elongation).

To fit all Mazda 6 Models including Skyactiv Models, the Konig Hypergram is a lightweight wheel weighing in at just over 7 Kilo (Price is for a set of four wheels)

The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Price shown is for a set of 4 wheels.

The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger. Color: Carbon Grey centre with Machined lip.

Price shown is for a set of 4 wheels 

NEW! The popular Konig Hypergram now in 16" size for NC MX5 & RX8

The Hypergram is an exceptionally light 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades!

Price stated is for a set of 4 wheels

Konig Heliogram Titanium Metallic *Knurled Bead* Wheels

Motorsport inspired, the Heliogram spoke profile design lends to efficient brake cooling as well as exceptional brake calliper clearance.

As used on our own 700BHP Race Car

With any wheel Konig develops with Flow Forming Technology, the end result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design.

Available to buy as either a set of two wheels or a set of 4 wheels, price reflected below.