MX5 NC WHEELS

Advanti Racing's Flow Formed line of wheels are STRONGER and LIGHTER than most choices! Price shown is for a set of 4 wheels.

Advanti Racing's Flow Formed line of wheels are STRONGER and LIGHTER than most choices! Price shown is for a set of 4 wheels.

These Enkei RPF1 are a personal favorite for their combination of great quality, great finish, strength, lightness and price.

Available in:- 

• "17x7.5" 48mm Offset 
• "17X8"    45mm offset 
• "17X8.5" 40mm offset

Price shown is for a set of 4 wheels

Placement centre cap for 17" Enkei PF01 wheels. Price is for a set of 4 caps available in Black or Silver

SPECIAL SBC FINISH! (SPECIAL BRILLIANT COATING) is a breakthrough technology that has enabled ENKEI to achieve a chrome-looking finish using synthetic coating over polished surface to achieve a brilliant metal finish without the high maintenance or weight associated with chrome. Price is for a set of 4 wheels

The all-new Enkei TS-10 takes the simplest approach to achieving Enkei's philosophy in creating a lightweight and strong wheel. Its 10 cleanly cut spokes reach the very edge of the wheel, creating the illusion that the wheel is bigger than its true size. Price shown is for a set of 4 wheels.

The all-new lightweight Enkei TS-5 is sure to be an instant classic in the tuning world. The TS-5 is remarkably simple and clean, relying on the tried and true 5-spokes and a lip formula, but the TS-5 gets the aesthetics just right.

*Price shown in for a set of 4 wheels*.

Enkei's lightweight new tuning wheel, the all-new TSV. The TSV features 10 paired spokes that are spaced perfectly to evenly distribute the loads and stresses placed on wheels at the track. Price shown is for a set of 4 wheels.

Nothing else comes close to this combination of ultra light weight and strength Rolling Rim technology used to make these rims results in grain alignment much like forging, for greater strength than is available from regular cast wheels, but at much lower cost than forged wheels!

Price shown is for a set of 4 wheels.

These special small diameter steel spline dive wheel nuts are designed for wheels with small bore wheel nut holes. Kit includes McGard Spline Drive 16 or 20 Wheel Nuts & Tool Set

If you have a MX5, these help properly fit your new alloys

These centre caps are for 16 and 17 inch Enkei RPF1! Price is for a set of 4 caps

They easily handle tremendous acceleration shock loads (shear) and lateral forces (elongation). Sold as a set of 16 or set of 20

Tough enough for an impact gun, yet super light. Less than half the weight of steel lugs. These are a closed end lug nut design for a clean look on your street car. Sold in sets of 16 or 20 lugs

Mazda MX-5 2005 - 2015 Spare Wheel & Tyre Kit

Please Note: These are temporary "get you home" wheels and are not suitable for prolonged use or high speeds. Every effort should be made to get the original tyre repaired or replaced as soon as possible.

Road Hero space saver spare wheels everything you need in case of a flat tyre.

Road Hero wheels are TUV approved

TÜV  Approved CALIBRE Wheels 

Classic Rotary Style mesh silver wheel with a polished lip

9x18"  5x114.3 ET35.00 72.60 Centre Bore

This is a Classic Mazda style wheel of the type that Mazda fitted to the RX-7FC Turbo II but in a much bigger Modern wheel size 

RX8, RX7FD & RX7FC Turbo II & MX5 NC

Price quoted is for a set of 4 wheels 

New for 2023, our ever popular Enkei 17x9 RPF1 now in RACE BRONZE!

Will fit the MX5NC, RX7FD & RX7FC models. 

For those buying new wheels whose cars come Tyree Pressure Monitors, these are a great high quality TPMS sensor at a fraction of the price of factory Mazda sensors.

Price for full set of FOUR sensors.

Replacement Centre Caps, Fits both Storm S1 and S2 wheels.

Price shown is for a set of 4 caps.

Set of FOUR. High quality, lightweight CNC aluminium alloy valves that will not wear out like the cheap freebies you get from the tire shop, and do not rust.

Moroso Wheel Studs, available as a  pack of 16 or 20 

Extreme strength and extended length wheel studs made in the USA by Moroso.

Manufactured from high grade SAE 8740 steel to withstand shear loads of 190,000 psi, with a black oxide finish.

A necessity for any car in competitive racing. They easily handle tremendous acceleration shock loads (shear) and lateral forces (elongation).

The already popular Enkei PF01. With its light 16.9 pound weight and MAT technology durability, the PF01 continues to be the hottest race wheel this year.

It continues to pass the test of being a true high quality race wheel.

Made with Enkei MAT technology, the PF01 is much stronger than regular cast wheels. The PF01 is a high quality, very lightweight wheel offered at a competitive price.

Price stated is for a set of 4 wheels.

Fits both MX5NC, RX8, RX7FD & RX7FC

The Konig Hypergram is a lightweight 7Kilo Wheel , that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! (Price quoted is for a set of four wheels)

The Hypergram is a lightweight 16.3 pound, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades!

Easy fit 45mm offset with 225/45/17.

To fit all Mazda 6 Models including Skyactiv Models, the Konig Hypergram is a lightweight wheel weighing in at just over 7 Kilo (Price is for a set of four wheels)

Konig Freeform is an all flow formed wheel design.

Specs: *17x9, 5, x114, *+40mm Offset, * 9kgs

YES, clears our Big Brake Kits.

Does not clear optional Brembo callipers.

Price shown is for a set of 4 wheels.

The Ultraform is a lightweight, 7-spoke design that has been developed for strength on the track while offering a modern and aggressive look when rolling around town.

The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brakes! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger. MAX CORNER SPEED WITH 245/40 AND 255/40 TYRES!

(Price is for a set of four wheels) RX8 Picture Courtesy of GWR Customer Thomas West

The Hypergram is a lightweight 16.3 pound, (7kgs) 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger.

(Price is for a set of four wheels)

Super Light & Super Strong, the Ampliform is an all new mesh inspired, flow formed wheel design from Konig.

Available in either 17x 8 or 17x9 please ensure you select the correct size wheel when ordering.

Price is for a set of 4 wheels . 

The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Price shown is for a set of 4 wheels.

The COUNTERGRAM is a new 9-spoke design built with flow-forming technology. Available here in Matte Black center w/ matte machined lip. Konig integrated feedback from their motorsport teams, racers and drivers into the new Countergram. Price of for a set of 4 wheels.

The Dekagram is a lightweight, 10-spoke design that is developed with flow forming technology that offers benefits for both track and street use.

Motorsport inspired, the Ampliform's spoke profile design lends to efficient brake cooling as well as exceptional brake calliper clearance.

Price shown is for a set of 4 wheels 

The Hypergram is an exceptionally light 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger than competitors including a bigger load rating than competitors in this weight class.

Price shown is for a set of 4 wheels.

The Rennform is a precisely crafted 15-spoke wheel constructed with Forming Technology to ensure a lighter and stronger wheel finished in Matte Grey. Price quoted is for a set of 4 wheels

NEW for 2021, the popular Konig Hypergram in 16" size! For years the track guys running stiff coil overs and 17x9 for fast weekends at the track and autocross asked us to make a strong and light 16-inch wheel to soften their daily driving to work....and here it is at last!

These wheels will also fit the MX5 NA/NB, MX5ND, Fiat 124 & Mini Cooper (2002-2006) models

Great for any street user seeking better ride quality. Recommended tire size: 205/50/16

Price shown is for a set of 4 wheels.

Will fit Mazda MX5NC, RX7FD & RX7FC models.

Motorsport inspired, the Freeform's spoke profile design lends to efficient brake cooling as well as exceptional brake calliper clearance.

This Matte Silver is not a traditional silver as it has depth even with the mild sheen. In person, this finish is extremely rich looking.

(Price quoted is for a set of four wheels)

The Hypergram is a lightweight, 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger. Color: Carbon Grey centre with Machined lip.

Price shown is for a set of 4 wheels 

The popular Konig Hypergram now with Carbon center and Machined Lip.

The Hypergram in this new finish is an exceptionally light 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades! Utilizing Flow Forming Technology allows the Hypergram to be lighter and stronger than competitors in this weight class, 700kg (1543 lbs) in this size!.

Price quoted is for a set of 4 wheels 

The popular Konig Hypergram in 16" size! For years the track guys running stiff coilovers and 17x9 for fast weekends at the track and autocross asked us to make a strong and light 16 inch wheel to soften their daily driving to work....and here it is at last! Great for any street user seeking better ride quality.

Price quoted is for a set of 4 wheels 

NEW! The popular Konig Hypergram now in 16" size for NC MX5 & RX8

The Hypergram is an exceptionally light 12-spoke design that is motorsport inspired in its construction, appearance and its ability to clear many big brake cars and upgrades!

Price stated is for a set of 4 wheels

The COUNTERGRAM is a new 9-spoke design built with flow-forming technology. Available here in Hyper Chrome center w/ mirror machined lip. Konig integrated feedback from their motorsport teams, racers and drivers into the new Countergram. The face was pushed out to allow for as much brake calliper protrusion as well as overall brake diameter near the drop centre. 

Price stated is for a set of 4 wheels 

Konig Heliogram Titanium Metallic *Knurled Bead* Wheels

Motorsport inspired, the Heliogram spoke profile design lends to efficient brake cooling as well as exceptional brake calliper clearance.

As used on our own 700BHP Race Car

With any wheel Konig develops with Flow Forming Technology, the end result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design.

Available to buy as either a set of two wheels or a set of 4 wheels, price reflected below.

Motorsport inspired, the Heliogram spoke profile design lends to efficient brake cooling as well as exceptional brake caliper clearance.

With any wheel Konig develops with Flow Forming Technology, the end result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design.

The MRK1 is a Mesh styled, FLOW FORMED design. Offered in a new finish, HYPER CARBON. This wet look dark grey has a ton of depth and looks killer!

The lug area is covered by a colour matched COVER plate and held securely to the wheel with an all-aluminium threaded gear cap that is finished off with a flat pop-in Konig Logo.

This wheel will fit the following models: -

MX5NC/ MX5ND/ FIAT124 /MINI COOPER 2O02-2006 

Price stated is for a set of 4 wheels

The AROCOVER is a removable disc that can be fitted to the new Konig MRK1 wheels in place of the standard lug nut cover that the wheel comes with.

Sold as a set of 4 Aro covers